Stupid Mounting Question

[DebKen]

I have a Jayco 19rd with limited counter space. I currently have a counter top paper towel holder. I purchased a cheap plastic paper towel holder to mount under the cabinet above the sink. I do not, however, want to put holes in the cabinet (the camper is brand new and I just can't bring myself to do it!) so I was wondering if there is any other way of mounting it that would be strong enough to hold when we pull paper towels off the roll yet easily removed if we want to move it to a different location? Also, we live in an area where it can go into the 90s in the summer time but be below zero in the winter time -- so it would have to hold during all those temperatures.
Thanks in advance!

[arkhillbilly]

Suggest you mod your 2nd home the way you like. If you do it with thought and taste, you will enjoy them and should you ever upgrade, the new owners will appreciate.

[blderman]

Amazon.com : Scotch(R) Heavy-Duty Fasteners, 2 Sets of 1 x 3 Inches, Strips, Black (RFD7091) : Craft Interlocking Tape : Office Products

[Jagiven]

I use the replacement command hook adhesive. You can buy it in all different sizes. Just note, I found to stick to the wood walls, I first must wipe the area down with a little alcohol, or goof off, or something similar. as there appears to be some type of silicone on the panels that make it hard to stick things to it.

[TWP723]

Originally Posted by blderman

Amazon.com : Scotch(R) Heavy-Duty Fasteners, 2 Sets of 1 x 3 Inches, Strips, Black (RFD7091) : Craft Interlocking Tape : Office Products

This is what I used as well to mount things. If I can't use the Command products, I resort to these.

[Tunce the traveler]

It was hard for me to do it also but it's on the underside of the cabinet and I figuered that everyone has one, it's not like a personal picture on the wall. If I sold the TT it would just go with it. My first one was a cheap one and at the end of a travel day it was unrolled on the floor so I bought this one that has a built in cog wheel so it doesn't unroll and super easy to take off one sheet one handed.

[Tunce the traveler]

Forgot to show with the roll on.

[clubhouse]

I put holes under the cabinet too. Can't see them. But since then I have see picture on here for folks who have a magnetic holder on the side of the hood vent. Obviously it has to come off for the few minutes a day you might use the cook top, but otherwise it's off the counter, out of the way and no holes.

[Angus]

Command products.

[OurJayco]

Originally Posted by Tunce the traveler

It was hard for me to do it also but it's on the underside of the cabinet and I figuered that everyone has one, it's not like a personal picture on the wall. If I sold the TT it would just go with it. My first one was a cheap one and at the end of a travel day it was unrolled on the floor so I bought this one that has a built in cog wheel so it doesn't unroll and super easy to take off one sheet one handed.

That is the exact same paper towel holder mounted in the exact same place I mounted mine with wall anchors. Yes this meant drilling holes in the underside of the cabinet, but like Tunce said, everyone will use it anyway.
It looks as though it was a factory install. If the next owner does not like the towel holder, they can remove it replace it with their preferred holder or have two holes on the under side of the cabinet.

[RedHorse1]

Originally Posted by Tunce the traveler

Forgot to show with the roll on.

Yup, we've got one just like it too. Mounted directly over the sink. Did the same thing at home (brick n stick). Pretty much everything else gets a Command hook and like Jag says, wipe it down with alcohol first.

[TWP723]

I have the same one also! Not at the TT so I'm not sure how it's mounted.

[DebKen]

Tunce the traveler Well yours looks so nice I might not mind drilling holes! May I ask where you purchased it? (Mine is literally the white plastic one that I paid $1 for)

[Tunce the traveler]

I got it at the kitchen store at the mall and you might find one on Amizon or bed bath and beyond. Now I drilled 2 pilot holes but I didn't go through the other side and I made sure the screws were just the right length. It's been almost 2 years and maybe 6 rolls being pulled off and it's never moved. Go for it!
Tunce

[mike837go]

I too have a 19RD with near zero counter top space.

I screwed a paper towel dispenser to the underside of cupboard between the stove and the dinette.

Modding a brand new RV make it your own.

[DebKen]

I bought the one that Tunce the Traveler has but I didn't hang it the same way because it would have been in front of my window (my 19rd is small). This is where ours is:

[TWP723]

That works!

[mike837go]

Originally Posted by DebKen

I bought the one that Tunce the Traveler has but I didn't hang it the same way because it would have been in front of my window (my 19rd is small). This is where ours is:

Neat! And within easy reach of the sink and the door.

Was that 12V socket under the control panel standard? It's "missing" on mine.

[DebKen]

Originally Posted by mike837go

Neat! And within easy reach of the sink and the door.

Was that 12V socket under the control panel standard? It's "missing" on mine.

I am not sure if it was standard -- we bought the floor model at an RV Show -- but I think it was.

[TWP723]

Originally Posted by mike837go

Neat! And within easy reach of the sink and the door.

Was that 12V socket under the control panel standard? It's "missing" on mine.

Looks like you've been horn-swaggled Mike!