Getting to be that time of year and thinking about add-ons for our 24 FBS. What I would like to do is install a Quickie Flush tank rinser the problem is the back of the holding tank is installed almost flush against the floor support cross beam so mounting the rinser in the back of the tank is just about impossible. Has anyone ever installed a flush system from either the side or the front facing back
No matter where it's installed, it will work for you.
Prior to installation, I drill the spray hole to a larger size. This allows a greater volume of rinse water into the tank.
In the photo below, you can see the difference in hole size. The Quickie Flush can be attached to a garden hose to check the spray pattern prior to installation.
__________________ Chipper
2006 Chevy Silverado 2500HD Duramax LBZ, CC, 4X4
2005 Jayco Talon ZX24-E Toy Hauler(SOLD).
2017 Forest River Hyper Lite XLR
Prodigy P2 Brake Control
12K Husky Straight Line WD Hitch
Also, I did away with the cheezy light-metal fitting supplied with the kit. They've been known to leak; and blow out. Hmm, how do I know this?
I picked up plastic, clamp-on fitting at Lowe's.
__________________ Chipper
2006 Chevy Silverado 2500HD Duramax LBZ, CC, 4X4
2005 Jayco Talon ZX24-E Toy Hauler(SOLD).
2017 Forest River Hyper Lite XLR
Prodigy P2 Brake Control
12K Husky Straight Line WD Hitch
Linear Mode
