Tv in bedroom

[Mduran1224]

I have a jayco jay feather 23RL 2018 model. There is no sticker in the bedroom for the tv mount. Can I assume there is a backer plate under the outlet and cable hook up?

[mikeauto2]

Originally Posted by Mduran1224

I have a jayco jay feather 23RL 2018 model. There is no sticker in the bedroom for the tv mount. Can I assume there is a backer plate under the outlet and cable hook up?

I hung a tv in my bedroom on my 267bhs. It had a sticker but it was not where the stud was. Double check.

Sent from my SM-G900V using Tapatalk

[Mduran1224]

Ok thanks

[geezerbob]

I have a 2016 23rlsw and there is a mount and bnc connector and 110 outlet high up
on the wall at the foot of the bed.
The mount is kind of strange looking plastic thing. I have no idea how to describe it.
Bob

[norty1]

Verify with a stud finder.

[Mduran1224]

i have one of those outside, but not in the bedroom. I did order one it’s called a kebloc . I’m wanting to put it in the bedroom, just don’t want to put it in the wrong spot

[Grumpa]

Here you go, makes it easy to use tv inside or out; KeBloc Products - LW Engineering

[mnsiu]

My 2016 24FB JayFligt had a 32 in. tv hanging in a recessed area above stereo. The bracket was held in place by 8-12 round head screws. It was not screwed into anything solid inside the wall. (shower on other side). I removed the 32 in. tv and reinstalled the bracket and tv in the bedroom corner next to outlet and tv coax plug-in using the exact same screws and bracket. Nothing in the wall to indicate mounting plate. 4,000 miles later the tv is still tight to the wall.