TV mount for my 26BH

[LiftedAWDAstro]

Here are a couple pics of our 26BH. You can see the white square sticker with the red lines that shows where the TV's go. The walls are only 1" thick in these areas.

Bedroom:



Dining area:

[thewild59]

I went with a mount from monoprice. I just could not seem mounting with just a 1" screw. I broke down and ran bolts through into the bunk. I did use a nice finish head and washer on the bunk side, with nut on the mount side. I hated drilling through the wall, but it does not look bad at all, and should hold way firmer. We have exposed screw heads in other places in the trailer. So I did not see why two more would hurt as long as we used a finish head. You can only really sees these anyway while in the bunk.

[IronmanMLR]

I used 1 inch lag bolts on mine with no problems. I had to use diagrams that I got from Jayco. The 2008 26bh doesn't have any stickers to mark were the TV went.

[jasonL_031]

i have the exact same mount lol it works great moved across canada last year and with some of the roads being in such disrepair it held up great best choice we made.

[Iraqvet05]

Is that your basic training photo in the pic, IronmanMLR?