|
|
09-18-2018, 06:41 PM
|
#1
|
Member
Join Date: Jul 2018
Location: Livermore
Posts: 47
|
Walking on roof
2012 Jayflight 26RLS. Went up onto the roof to check out the a/c unit and was worried I might damage something walking up there. Is it safe to walk on the roof? Any areas I should avoid? I know I will be up there soon when I wash the trailer. I just want to make sure I don't step where I'm not supposed to.
|
|
|
09-18-2018, 07:18 PM
|
#2
|
Senior Member
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 16,079
|
Unless you're a Sumo wrestler you should be fine. You can always use a coupe small pieces of plywood to stand on if the will ease your worries.
__________________
DISNEY LOVERS
|
|
|
09-18-2018, 07:25 PM
|
#3
|
Senior Member
Join Date: May 2012
Location: Minnesota
Posts: 9,770
|
Should be no issues. The plywood is thin, and only supported every 24 inches, so it flexes a lot. Also the membrane is thin and tears easily. I make sure my shoe's soles are clean. I also put the stabilizers down, and put a piece of cloth between the tt and ladder, as my ladder tore the membrane the first time I went up.
Take it slow and easy.
|
|
|
09-18-2018, 08:53 PM
|
#4
|
Senior Member
Join Date: Jul 2014
Location: Picayune
Posts: 1,970
|
No problem walking on the roof of my fiver. I wear deck shoes and make sure nothing is caught in the soles.
__________________
Charlie & Lizzie the Mini Dachshunds
2008 Jayco Eagle Super Lite 30.5 RLS
2015 F350 Lariet Crew Cab Long Bed 6.7 Diesel B&W Companion Hitch
24 hours in a day, 24 beers in a case. Coincidence? I think not.
|
|
|
09-19-2018, 11:55 AM
|
#5
|
Senior Member
Join Date: Feb 2017
Location: Dallas
Posts: 4,281
|
Pair of deck shoes or old canvas Converse with no issues and I weigh about 243lbs
__________________
Tight Lines and accurate shots
|
|
|
09-23-2018, 08:27 PM
|
#6
|
Senior Member
Join Date: Jul 2017
Location: Orange
Posts: 491
|
It shouldn't damage your roof unless you have rocks stuck in the soles of your shoes or something like that. However, be careful. We sometimes sit or crawl on hands and knees when we get up there to clean the roof or check on things.
|
|
|
09-23-2018, 08:35 PM
|
#7
|
Senior Member
Join Date: Sep 2017
Location: South/Eastern Oregon
Posts: 2,257
|
I was up on our TT roof a few times this last summer. I resealed the sky lights, vents and front cap with eternabond tape. I also put dicor on other areas. I just kept my shoes clean and watched how I twisted my feet on the rubber roof. The roof held me very well. I weight 235 pounds.
|
|
|
09-24-2018, 10:20 AM
|
#8
|
Senior Member
Join Date: Aug 2017
Location: San Jose
Posts: 287
|
Have to ask but is there anyone in the 340 pound range that has walked on the roof. I have not made it up there yet and it would be good to know if I should just stay on my hands and knees.
__________________
2022 Eagle 355MBQS
2018 Jay Flight 32BHDS (Sold)
2019 Ford F350 LBCC 6.7 Diesel
2003 Ford F250 6.0 Diesel (Sold)
Reese Steadi-Flex (Sold)
DH, SWMBO, DS, & Dog
|
|
|
09-24-2018, 10:26 AM
|
#9
|
Senior Member
Join Date: Jun 2017
Location: johnstown
Posts: 321
|
Quote:
Originally Posted by jpgale
Have to ask but is there anyone in the 340 pound range that has walked on the roof. I have not made it up there yet and it would be good to know if I should just stay on my hands and knees.
|
I run 210 and I keep to the edges and trusses. It flexes way to much for my liking .
|
|
|
09-25-2018, 05:10 PM
|
#10
|
Junior Member
Join Date: Mar 2017
Location: Hillsborough
Posts: 14
|
Keep your shoes clean and rinse the top if you go up there
__________________
2016 Jayco Whitehawk 28DSBH
2020 GMC Sierra 2500HD-Dmax
|
|
|
09-25-2018, 06:05 PM
|
#11
|
Senior Member
Join Date: Jul 2016
Posts: 857
|
Quote:
Originally Posted by o2silverado
I run 210 and I keep to the edges and trusses. It flexes way to much for my liking .
|
Same here. I limit time on the roof. I do as much as I can from a ladder or scaffolding. The roof is cheaply constructed - flexing, seam and joint separating, TPO tearing, staples dislodging and protruding all unnerve me. With a minimal amount of time on the roof, ours has exhibited all of these. It is fragile. I handle the entire RV with kid gloves. The roof is prime for failures. It takes next to nothing to damage an RV.
|
|
|
09-25-2018, 06:40 PM
|
#12
|
Senior Member
Join Date: Aug 2017
Location: North West
Posts: 107
|
I've been on my roof, I weight in at 255 but I did stay close to the edge and my TT is older with a metal roof so no worries about tearing the rubber membrane. It did flex though so I was leery about standing, I stayed on hands and knees.
|
|
|
09-25-2018, 07:55 PM
|
#13
|
Senior Member
Join Date: Apr 2015
Location: Florissant
Posts: 628
|
You can help spread the load if you use a couple of 2 x 6 boards.
__________________
Skids
Was 2015 SLX 195RB
Now Bullet 248RKS
2014 Ford F150 3.5L Ecoboost
|
|
|
09-25-2018, 09:07 PM
|
#14
|
Senior Member
Join Date: Oct 2015
Location: Worcester
Posts: 1,428
|
I go barefoot... I feel most stable/comfortable that way.
__________________
2016 Jay Flight 38FDDS
|
|
|
09-25-2018, 09:31 PM
|
#15
|
Senior Member
Join Date: Jul 2016
Location: Mapleton
Posts: 4,366
|
I am a barefoot person also. Take your time, walk slowly, make sure of your footing. Remember - - - it is 10 feet down to the pavement so watch your step, take time to plan what you will do. When you can stand on where the beams hold the plywood. If you find a soft spot you may have found a trouble spot which may need to be repaired.
__________________
2017 SLX 195RB
2021 Jeep Grand Cherokee Summit L 5.7L V8
Andersen WDH hitch, Renogy 100 AH Lithium &
200 Watts solar panels from Renogy
Prev. '14 Jeep Grand Cherokee Overland, gas 3.6 V6
|
|
|
09-26-2018, 05:30 AM
|
#16
|
Senior Member
Join Date: Nov 2017
Location: Longwood
Posts: 1,263
|
Quote:
Originally Posted by Octopus Prime
However, be careful. We sometimes sit or crawl on hands and knees when we get up there to clean the roof or check on things.
|
Ditto!
__________________
2018 Jay Flight 29RLDS
2019 F250 FWD gasser
ΣΧ, UCF '78
|
|
|
09-26-2018, 10:17 AM
|
#17
|
Senior Member
Join Date: Aug 2017
Location: San Jose
Posts: 287
|
Well hands and knees it is for me then.
__________________
2022 Eagle 355MBQS
2018 Jay Flight 32BHDS (Sold)
2019 Ford F350 LBCC 6.7 Diesel
2003 Ford F250 6.0 Diesel (Sold)
Reese Steadi-Flex (Sold)
DH, SWMBO, DS, & Dog
|
|
|
09-26-2018, 10:58 AM
|
#18
|
Senior Member
Join Date: Dec 2015
Location: Arizona
Posts: 2,324
|
Roof looks easy to navigate from the ground, until I get up there.Solar panels AC units vents ect. Have to be careful up there, one fall and that's all.
|
|
|
09-26-2018, 02:57 PM
|
#19
|
Senior Member
Join Date: Feb 2017
Location: Dallas
Posts: 4,281
|
There ya go, had to put that thought in my head didn't ya!! Your Killin me LOL
Quote:
Originally Posted by bdreinv
Roof looks easy to navigate from the ground, until I get up there.Solar panels AC units vents ect. Have to be careful up there, one fall and that's all.
|
__________________
Tight Lines and accurate shots
|
|
|
09-27-2018, 09:40 AM
|
#20
|
Junior Member
Join Date: Apr 2016
Location: Dunkirk
Posts: 8
|
Always worried about the weight and flexing while up there...until I was at the dealer watching 4 guys walking on 1 roof, pressure washing and brushing
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|