Wall schematic for 2013 Eagle 284 BHS

[Tail_gunner]

I have a 2013 Eagle 284BHS travel trailer. I am considering replacing the inadequate outside speakers with some better ones. But before I begin that project, I'd like to know where the aluminum frame members are inside the wall. I'd like to avoid accidentally 'finding' one. So before I embark on this project, I'd like to see a right side wall schematic for a 2013 284BHS. If anyone has one they can share with me, that would be great.

FWIW, I already contacted Jayco and was told they would not provide one because the camper is still under warranty. That excuse is BS because I previously got from them a wall schematic for the rear wall.

[Doug]

I got mine in 24 hrs by emailing Jayco with my VIN#

service@jayco.com

I also had them send the schematics for the 12V and 120V systems. They can be handy too.

Best regards,
Doug

[Tail_gunner]

That's who I contacted, service@Jayco.com. They turned me down which is interesting since the fact that in Aug they sent me a rear wall schematic.

[Doug]

Hmm, never had that problem.
Try again and tell them the Mods from Jayco Owners Forum suggested you contact them,
Remind them how helpful they've been to all of us.

Doug

[OnTheGo]

FWIW, I already contacted Jayco and was told they would not provide one because the camper is still under warranty.

I was told (the same thing) Jayco's policy is not to provide plumbing and electrical schematics on units still under warranty. I told the rep they had done so on two other TTs I've had in the past. She said it's been there policy all along and the others should not have been sent. They did send me a wall print.