How do you remove washer dryer combo to work on it. It’s a Splendide 210 XC
2019 Jayco Eagle TT 330RSTS
There should be two hold down clips on the bottom front. If you have the Splendide drip pan you also need to remove the front edge which is also held in place by a couple screws.
Mine didn’t have the 2 clamps, just sitting in there in the drip pan. Took 2 of us to wiggle it out of there. After a quick search it looks like it may be the control panel hopefully not as I’m sure they are not to cheap. Thanks for your input