Whitehawk prewire for backup camera - need the instruction

[bono]

Hi Guys,

I cannot find one pager (I believe from Jayco), with instructions how to connect the backup camera. The installation was not done properly initially, i.e. the camera is on, only when the lights are on. I would like to make it right.

Do you have this one pager handy?

Thanks!

[WinnieView]

Have you emailed Jayco C.S.?

[Cannon]

Originally Posted by bono

Hi Guys,

I cannot find one pager (I believe from Jayco), with instructions how to connect the backup camera. The installation was not done properly initially, i.e. the camera is on, only when the lights are on. I would like to make it right.

Do you have this one pager handy?

Thanks!

From what I've read from these forums most all of them are wired that way on the newer ones. parking lights must be on for camera to work.

[Swiss67]

The back-up camera is on when the lights of the trailer is on, so If you have it on automatic during the Day, your camera will be off as well.

[Scott_Trailer_Newbe]

Running lights must be on. This is the correct setup.

[bono]

I emailed Jayco - they sent me something, but not what I was looking for. In the meantime, I found what I was looking for



If the parking lights need to be on in order to have the camera on, what is the "Camera pre-wire" option then?