Just wanted to drop a line to everyone and let them know that the wind sensor I had installed in my carefree electric awning does work. I had a thunderstorm come through today and the wind picked up to about 20mph and the awning started to shake and the next thing I know it rolled up on its own. Looks like it might be a wise investment after all. For more info go on carefree of colorado and look under acc. This viberation sensor is a carefree product.
__________________
2010 F250 6.4 L
2011 Jayco 330 RTLS
I was told that our "flat pitch" awning can't be hooked up with that sensor, but we didn't verify that with Carefree. Glad to hear yours works well
__________________
Denise, DH, grandkids, and two rescue pups
-2016 Jay Flight 29QBS Elite
-2016 Ford F-250 XLT 4x2, 6.2L EFI V8, 4.30 Elec Lock, Heavy duty Alt
Never take no for a answer. I was also told , by my dealer,that it would not work on my carefree traveler awning. I made my dealer get on the internet while I was there and they agreed there was a working vibration sensor for my awning. When they contacted Carefree they were told they did not offer a sensor for my awning. My dealer told them what I found on the internet and after a little talking they were told there was a device that Carefree had that would help prevent wind damage. The device cost $98.00 and cost me 2 hours labor by my dealer($100 per hr.)
__________________
2010 F250 6.4 L
2011 Jayco 330 RTLS
Linear Mode
