Jayco RV Owners Forum

Thread Tools Display Modes
Old 07-02-2014, 11:48 AM   #1
Junior Member
Join Date: Jul 2014
Location: Pittsburgh
Posts: 1
Question Damp plywood near front of roof

I own a 2009 Jayco 1206 series pop up. I recently noticed some water (after a rain) on the upper part of the canvas close to where it is sewn into the underside of the roof. I also noticed that the plywood under the front part of the roof was damp. I am trying to figure out how water could have dampened that part of the underside to the front part (curved portion) of the roof. Perhaps the camper was leaning just enough for water to drip into that area?? I checked the seam at the most bottom part of the front of the roof line on the exterior and it looks like it could use a bead of sealant along the metal strip but nothing major. Then again, maybe it is enough for water to seep through to make the bottom of the plywood under the curved part of the roof to get damp. A closer look of the plywood shows a slight dried water mark at the bottom edge of the plywood.
Any feedback would be greatly appreciated as this camper has always been dry and I want to keep it that way. No problems with the interior..this is just some water buildup on the underside of the curved part of the roof.
wlaur2469 is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 12:03 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.