Hey guys new to the forum! Just purchased 1998 pop up and have a left rear pulley issue. Floor rotted and allowed pulley to pull from floor. Appears like it was bolted to the floor only not to the frame. Going to restore the camper and. Was looking for the location where this pulley belongs. Any pictures or diagrams would be great. Thanks happy campin!
Here is a pic of my repair on the left front pulley in my pup. On the underside of the floor I installed a large piece of plywood between the frame rails to bolt to. The area where the pulley sits was cut out and filled with a piece of plywood with a piece of aluminum that the pulley sits on and thru bolted to the plywood underneath the floor.
Scott, Check the other pulley on the same side. Usually the pulleys on the side opposite of where the winch is located are just bolted to the wood floor. Pulleys on the winch side are bolted thru a metal extension of the lift assembly. Poor design by Jayco.
Linear Mode
