Electric tongue jack

[Lotsasawdust]

I have a 2011 1207. Would like to put an electric tongue jack on it but was concerned with the clearance between the tongue and the bed. Does anyone have one on their popup?
Thanks
Rick

[Seann45]

My jack was the same height as the crank one was.... just measure from the top of the flange to the top of the jack and compare.... since crank jacks are pretty much universal one should be the same height as all the others...

[Lotsasawdust]

Thanks for the info. I'll check it out.
Rick

[RedHorse1]

I have a hybrid (X23B). Just installed an Atwood 3500# and it clears the front bunk by about an inch. With weight I think it just touches. I plan to raise the bunk by a bit by using the adjustable attachment points for the support cables. Like Seann suggests, measure. Install was brainless n painless, love it!

[Preston]

Never bothered with electric tongue jack on our pup. It's tongue weight was only 350lbs and the total weight was 3200 lbs so I would pull it to the truck lift up the tongue and set it on the ball.