|
|
05-09-2013, 08:11 PM
|
#1
|
Junior Member
Join Date: May 2013
Posts: 3
|
Led interior lights conversion?
HAS ANYONE CONVERTED THEIR INTERIOR LIGHTS TO LED's? SEEMS LIKE A GOOD WAY TO GET THE BATTERIES TO LAST FOR WEEKS OR AT LEAST A LONG TIME.
|
|
|
05-09-2013, 08:42 PM
|
#2
|
Moderator Emeritus
Join Date: Oct 2012
Location: Cape Coral, Florida
Posts: 4,796
|
A lot of people do this.
I have 921 interior bulbs and just found a direct replacement from eTrailer.com or try Tweetys.com
You can find kits or direct replacement bulbs on Ebay, Amazon etc.
Shop around, prices can vary a lot.
Doug
__________________
Cape Coral, Florida
2021 Toyota Tundra SR5, 5.7 V8
2022 Jayco 240RBS
|
|
|
05-09-2013, 08:51 PM
|
#3
|
Senior Member
Join Date: Sep 2011
Location: Long Island, NY
Posts: 849
|
Quote:
Originally Posted by BFTMASTER
HAS ANYONE CONVERTED THEIR INTERIOR LIGHTS TO LED's? SEEMS LIKE A GOOD WAY TO GET THE BATTERIES TO LAST FOR WEEKS OR AT LEAST A LONG TIME.
|
I used these. They produce a very similar color and intensity as the stock incandescent bulbs.
__________________
2013 Jayco Jay Flight 26RLS - 2013 1500 Ram Big Horn
2013 Jayco White Hawk 28DSBH - 2010 V8 Tundra
2012 Jayco X17Z SOLD!:Beerchug:
|
|
|
05-11-2013, 05:09 AM
|
#4
|
Junior Member
Join Date: May 2013
Location: Arlington Height, IL
Posts: 16
|
Quote:
Originally Posted by cm11599ps
I used these
|
Do those lights replace the 921 bulb? I've been looking for the same thing and when I look at that link it doesn't look like the connector is the same. Maybe they're showing a picture that doesn't show a good connector?
I went to the Chicago RV show a few months back and there was a vendor selling the whole fixture WITH the bulbs for less than $20. I've been looking for them ever since, I should have bought two of them right there! So I continue the search!
|
|
|
05-11-2013, 05:31 AM
|
#5
|
Senior Member
Join Date: Sep 2011
Location: King George
Posts: 2,761
|
If you are not sure the trick is to only buy ONE... Then if it is what you like then get all you need. You will need something in the 400-500 LUMENS rating and also WARM WHITE color to replace the current incandescent automotive type bulb. If the company doesn't list their LUMENS rating then you probably won't find it bright enough for you.
This is good place to read up on LEDs
https://www.rv.net/forum/index.cfm/f...d/24818888.cfm
I first purchased the COMMAND ELECTRONICs PN 170-111 which are 510 LUMEN Boards that stick up inside the DUAL and SINGLE Ceiling light fixtures - They put off excellent light. For my other sockets Porch Light- a couple of Bed Area lights I used the LEDTRAILER ROUND LEDs PN 921-380 which are 380 LUMENS. They are excellant lights as well.
All was going great for me until I did go camping way-back-in-the-woods and found that all of these regulated type of LEDs lights put off a small amount of RFI which in my case interfered with my weak radio and tv reception. With any LED light "ON" my OVER-THE-AIR HDTV reception would totally BLANK OUT. My NOAH WEATHER RADIO reception would not work as well. My Amateur Radio reception was very reduced. All of these Radio/TV units were on OUTSIDE ANTENNAS. When I turned OFF the LED light everything started working as before...
To fix this problem and with much help from CamperPaul, SMKETTNER, and KendallP along with a whole host of others I replaced half of my CEILING LED lights with a SMD BOARD 36-1210 type LED 252 LUMENS (Ebay from CHINA @ $4.99) that does not incorporate an ON-BOARD regulator that allows the board to operate between 8-30VDC using what is known as a BUCK REGULATOR circuit. I have tried a couple of these non-regulated boards and they work fine with NO RFI signals being produced. With my DC Voltage range of 13.2 to 14.4VDC they seem to work just fine but the experts tell me their life span may be reduced somewhat as their operating voltage range spec is not that high but at $4.99 each probably no big deal.
This is why you should only purchase ONE of whatever you get and check for these things in your trailer. What I run into may not be an issue for you at all???
I am very happy with the 4.99 EBAY/CHINA LED boards and after several years of use now I have one board that has two groups of three leds out. I will replace the whole $4.99 board one of these days if it gets dimmer.
You will have to satisfy yourself on what works best for you.
just my thoughts...
Roy Ken
__________________
Roy and Carolyn
I claim Horse Creek Country in Southern Ill - Momabear is from North Texas
We live in King George VA
RETIRED DOD DOAF DON CONTRACTOR Electronics Tech 42YRS
"We're burning daylight" - John Wayne
2008 STARCRAFT 14RT OFF-ROAD POPUP with PD9260C and three 85AH 12VDC batteries
2010 F150 FX4 5.4 GAS with 3.73 gears - Super Cab - Towing Package - 2KW Honda EU2000i Gen
K9PHT (since 1957) 146.52Mhz
"We always have a PLAN B"
|
|
|
05-11-2013, 11:31 AM
|
#6
|
Senior Member
Join Date: Sep 2011
Location: Long Island, NY
Posts: 849
|
Quote:
Originally Posted by Moose73
Do those lights replace the 921 bulb? I've been looking for the same thing and when I look at that link it doesn't look like the connector is the same. Maybe they're showing a picture that doesn't show a good connector?
I went to the Chicago RV show a few months back and there was a vendor selling the whole fixture WITH the bulbs for less than $20. I've been looking for them ever since, I should have bought two of them right there! So I continue the search!
|
Yes, look at the picture.
Each panel has a red and black wires coming out of it that lead into the black connecter. On the right side of the picture are 3 different types of plugs to fit 3 different light sockets. When you order one panel you get everything included in the picture. You would want to use the white plastic plug as that will fit your 921 sockets. You simply connect the panel to the white plug and you're good to go.
__________________
2013 Jayco Jay Flight 26RLS - 2013 1500 Ram Big Horn
2013 Jayco White Hawk 28DSBH - 2010 V8 Tundra
2012 Jayco X17Z SOLD!:Beerchug:
|
|
|
05-13-2013, 09:55 AM
|
#7
|
Junior Member
Join Date: May 2013
Location: Arlington Height, IL
Posts: 16
|
Quote:
Originally Posted by cm11599ps
When you order one panel you get everything included in the picture. You would want to use the white plastic plug as that will fit your 921 sockets. .
|
That's great, I didn't notice that there were different connectors until I studied the picture - and you mentioned it. Looks like it could be a good fit to save power. Thanks again.
|
|
|
05-13-2013, 01:05 PM
|
#8
|
Senior Member
Join Date: Mar 2013
Location: Planet Earth
Posts: 6,818
|
I just ordered a dozen of the flat type....I have the 921 bulb currently. I am curious as to the lighting disbursement / lumens comparison / diffusing of a flat panel LED as opposed to a round bulb in the fixture.....I guess I'll find out soon enough.
|
|
|
05-13-2013, 01:12 PM
|
#9
|
Senior Member
Join Date: Sep 2011
Location: Long Island, NY
Posts: 849
|
Quote:
Originally Posted by Threebutchers
I just ordered a dozen of the flat type....I have the 921 bulb currently. I am curious as to the lighting disbursement / lumens comparison / diffusing of a flat panel LED as opposed to a round bulb in the fixture.....I guess I'll find out soon enough.
|
Well, the best I can do is to give you a picture of both in operation.
This picture was taken with the flash on my camera turned off.
This picture was taken with the flash on my camera turned on.
One bed has the standard 921 bulb, the other bed has the LED panel. I'm not going to tell you which is which, you decide. lol
__________________
2013 Jayco Jay Flight 26RLS - 2013 1500 Ram Big Horn
2013 Jayco White Hawk 28DSBH - 2010 V8 Tundra
2012 Jayco X17Z SOLD!:Beerchug:
|
|
|
05-13-2013, 04:11 PM
|
#10
|
Senior Member
Join Date: Feb 2012
Location: Morinville, Alberta, Canada
Posts: 121
|
I just installed the first twelve LED's that cm11599ps had posted earlier. I was a little Leary about them being offshore and possibly low quality. But after installing them I am very impressed, so much that I have ordered another fourteen to replace all of my 921 light bulbs. They give a really nice natural white light. I'm still a little worried about the longevity of these but for the cost, if they last two or three years they will of paid off and I would be more than willing to replace them. Here's a side by side pic of the LED vs. the regular bulb. Ryan
[ATTACH][/ATTACH]
__________________
Me, the wife, three kids (Son, 9 yr old & twin 5 yr old girls)
2013 Ford F-150 FX4 5.0L 4X4 3.55
2012 Jayco Jayfeather 228
|
|
|
05-13-2013, 04:21 PM
|
#11
|
Senior Member
Join Date: Mar 2013
Location: Planet Earth
Posts: 6,818
|
Quote:
Originally Posted by cm11599ps
Well, the best I can do is to give you a picture of both in operation.
This picture was taken with the flash on my camera turned off.
The bottom is the LED
This picture was taken with the flash on my camera turned on.
One bed has the standard 921 bulb, the other bed has the LED panel. I'm not going to tell you which is which, you decide. lol
|
I'm guessing the bottom is the LED...
|
|
|
05-13-2013, 10:20 PM
|
#12
|
Senior Member
Join Date: Jul 2011
Location: Albuquerque
Posts: 261
|
My LED adventure is documented in link in my sig. There are a lot of variables for everyone....
-Chak
|
|
|
05-14-2013, 04:32 AM
|
#13
|
Senior Member
Join Date: Sep 2011
Location: Long Island, NY
Posts: 849
|
Led interior lights conversion?
Yes, led panel is on the bottom. :-)
__________________
2013 Jayco Jay Flight 26RLS - 2013 1500 Ram Big Horn
2013 Jayco White Hawk 28DSBH - 2010 V8 Tundra
2012 Jayco X17Z SOLD!:Beerchug:
|
|
|
05-14-2013, 05:16 AM
|
#14
|
Senior Member
Join Date: Mar 2013
Location: Planet Earth
Posts: 6,818
|
Quote:
Originally Posted by cm11599ps
Yes, led panel is on the bottom. :-)
|
what do I win?......thanks for the post and tips!!!!....I'm looking forward to trying them out. We're not too worried about battery life, but we do notice the excess heat from the fixtures and the fact that the inverter fan comes on when we start pushing the 12V system. Heat is the enemy.....
|
|
|
05-14-2013, 05:30 AM
|
#15
|
Member
Join Date: Feb 2012
Posts: 89
|
Quote:
Originally Posted by BFTMASTER
HAS ANYONE CONVERTED THEIR INTERIOR LIGHTS TO LED's? SEEMS LIKE A GOOD WAY TO GET THE BATTERIES TO LAST FOR WEEKS OR AT LEAST A LONG TIME.
|
I replaced all my lights with these, last year and they work great.
http://www.ebay.com/itm/10X-48-SMD-L...5be366&vxp=mtr
|
|
|
05-14-2013, 05:35 AM
|
#16
|
Senior Member
Join Date: Mar 2013
Location: Planet Earth
Posts: 6,818
|
^^^^ X2 ^^^^^ - but shop the price on that type and source, they are down to $2-$3 each with shipping......
|
|
|
05-14-2013, 08:41 AM
|
#17
|
Senior Member
Join Date: Mar 2013
Location: Planet Earth
Posts: 6,818
|
OR $1.70!!!!!! (I just noticed the bulk count)......and getting lower by the minute!!!!!. I paid $2.35 a week ago......
|
|
|
05-14-2013, 01:35 PM
|
#18
|
Senior Member
Join Date: May 2013
Location: Raleigh, NC
Posts: 100
|
Yes, Just replaced all the interior lighting to LED bulbs
Quote:
Originally Posted by BFTMASTER
HAS ANYONE CONVERTED THEIR INTERIOR LIGHTS TO LED's? SEEMS LIKE A GOOD WAY TO GET THE BATTERIES TO LAST FOR WEEKS OR AT LEAST A LONG TIME.
|
Yes, This is a great way to cut battery amp draw/energy consumption from lighting and another benefit is eliminating the heat from those incandescent bulbs when you are trying to stay cool. You'd be surprised at how much energy those incandescent bulbs waste into heat (something like 95%). Just some advice...these 168/194 LED bulbs are available faily cheap on Amazon and other sites. The bulbs must be installed with the correct polarity +/- and usually aren't marked (they only work one way). What I do is pull the old bulb out then turn the light on and install the LED...if it doesn't light up; flip it over...its a 50/50 shot. I like the LED pure white lighting over the yellowish incandescents.
__________________
Bart and Tina
2001 Chevy 2500HD 6.0 Silverado 4x4-Banks Power
1997 Jayco Eagle 5er 285BHS-flipped axles
|
|
|
05-14-2013, 03:30 PM
|
#19
|
Senior Member
Join Date: Mar 2013
Location: Planet Earth
Posts: 6,818
|
I have access to a light meter....curious to give it a try on this project
|
|
|
05-22-2013, 05:36 AM
|
#20
|
Junior Member
Join Date: May 2013
Location: Arlington Height, IL
Posts: 16
|
Thanks for all the feedback on those lights. I decided since I'm only replacing 4 in the pop-up I'm just going to do it. $10 for four of them, if they work and last even one season I'm good with that...
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|