lights

[Talltaylor]

New on here but need help. Getting my 94 1208 ready for next weekend. Bought a new pigtail before a trip and all lights did not work. I thought just bad light bulbs and went on trip. Last weekend getting ready I have no lights. Checked voltage. Had voltage on wires coming out the back. Thought bad light assemblies. Bought new ones. Still cant get the lights to work properly. I cleaned ground point on shore connector. I guess I just need a GOOD schematic of the wiring on the camper. I looked at another site and it said that the wiring is different the a regular trailer. Need help. Anybody.. anybody...

[tnchuck100]

On a popup the first thing that comes to mind is a switch that operates when the sink is flipped over or a connector near one of the top support poles.

[Talltaylor]

I don't think its either one of those. I don't have any brake or turn signals or running lights

[emjayuu]

Originally Posted by tnchuck100

On a popup the first thing that comes to mind is a switch that operates when the sink is flipped over or a connector near one of the top support poles.

That switch only disconnects interior lights. Not exterior

[Parcany]

not sure but I would say that either the plug for the trailer is messed up or there is a ground problem,

[Talltaylor]

That's what I'm thinking as well. I sent a request to Jayco requesting a wiring diagram as others have done on a different post. Hope it works. Fellow retired AF here also!

[Amanda]

Any luck on getting that diagram and were you able to get your lights running? Having the same issues here

[Talltaylor]

Yes I got the diagram from Jayco. I downloaded a PDF file they sent. Yes it did help but I still had to "rewire" my pigtail .