I am assuming that your hoist system is similar to the one on my older 1006 (manual winch, cables, etc.). If so, it sounds like two of your cables are out of whack (technical term). When I first got my used 1006, one corner would not go up and it turned out that the eyebolt for that corner had stretched out and released the cable connection. You need to inspect your cable system from the winch all the way to each leg connection. In addition to the four into one cable connections at the winch, there are numerous pulleys that can come loose. This is a pain in the butt since you have to go in behind a lot of your cabinetry and maybe even remove some of it. Good luck.
|