Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Jayco RV Owners Forum
 


Jay Feather EXP 29A - Modifications
What we have done to our Jay Feather to make it better fit our needs.
Looking here at the welds you can see that from the manufacturer the welds did not penetrate which resulted in the failure. I'm actually very...
Looking here at the welds you can see that from the manufacturer the welds did not penetrate which resulted in the failure. I'm actually very...
RBW QDS-7009-SM SYSTEM Main Slide Unit sitting on the bench so that the gear drive mounting plate can be welded.
After talking with Jayco they provided me with the drawing showing my Jayco Main Slide.
Looking up under the slide the open end of the channel is where the drive unit was welded to the slide.
So this happened on our last trip of the year. When we went to bring in the slide it jumped and then the Gear drive motor, worn gear and mounting...
Added a set of multi-color LED lights under the awning so that we could pick a color for where ever we are. Just need to tidy up the wiring but its...
Needed a place to keep the fishing poles up out of the way along with the broom and awning rod. Cut 2" diameter holes in two boards that were 6" wide...
The cabinet above the sink is tapered and a large space leaving dishes stacked and always a mess. With the shelf having a lip allowing the coffee...
The closet was a big open space that we would never fully use as a closet so we decided to split it in half making a pantry. Cut 20" deep wire shelf...
The cabinet above the sink is tapered and a large space leaving dishes stacked and always a mess. So we decided to add a shelf to divide the space.
The closet was a big open space that we would never fully use as a closet so we decided to split it in half making a pantry. Removed closet rod,...
The closet was a big open space that we would never fully use as a closet so we decided to split it in half making a pantry. This is prior to making...
Disclaimer:

This website is not affiliated with or endorsed by Jayco, Inc. or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 06:49 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.