Conversation Between Kevin O. and sean_cj7
Showing Profile Comments 1 to 3 of 3
-
Thanks for your help. I've been talking to the sales person about the axle height adjustment and they asked me for my bed rail height. We traveling from CT to Ohio to pick the camper up in 2 weeks and I'm trying to get everything in order for the pick up. So if needed I'm trying get the height figured out. If you could measure your bed rail height on your truck, I can compare it to mine. And pass the information on to them. I appreciate any help you can give me.
Sean
-
Hello Sean, my trailer sat a little nose high so I had the dealer raise the trailer axles to the highest setting.. Now it sits just about level.. My truck pulls the camper great! All I have done to the truck is a S&B intake, MBRP exhaust, DpTuner chip with a 60 hp and 80hp tow tunes. And I also have the 6.0L trans cooler.. My trans is completely stock with 178,000 miles. So it is the weakest link and I will have either a John Wood or a BTS 4R100 in it soon.. If you have any other questions don't hesitate to ask.
Kevin
-
My name is Sean, and in searching for information about towing my new 5th wheel I came across some of your posts. We are taking delivery of a 29.5BHOK in 2 weeks and will be towing it with a 2000 F350, 7.3l. I was wondering how level you were able to get the camper, and i was there anything special you needed to do, since you have the same setup basically. We upgraded to the 16" wheels. Also, do you have any issues pulling the camper with your truck. Any modifications to your truck. I've been running an aftermarket transmission cooler for years, and a Banks system with their Transcommand. I'm going to be switch out the cooler with a 6.0l cooler, and I'm upgrading the stock valve body with one from John Woods. Any insight on the setup would helpful, since you have basically the same setup.
Sean