Jayco RV Owners Forum

Jayco RV Owners Forum (https://www.jaycoowners.com/forums/)
-   Jayco Class C Motorhomes (https://www.jaycoowners.com/forums/f5/)
-   -   Hooking up to city water (https://www.jaycoowners.com/forums/f5/hooking-up-to-city-water-15764.html)

stans02 09-26-2013 08:56 PM

Hooking up to city water
 
When I hook the city water hose to the water inlet, turn the valve and I have water. I was reading my manual and it says I have to colose some valves, and open others. Looks kind of confusing to me. None of the valves are marked. Is it really necessary to do that. I have a water regulator, so I don't get excessive pressure. The pump doesn't come on when I open a valve for water because the line pressure keeps it from operating. What do you think? Stan

Doug 09-26-2013 09:24 PM

Sounds like everything is probably set up for City water at the moment.
The only thing you may have to check is to make sure water is going into your HW tank. If so, sounds like you're all set.

Doug

Threebutchers 09-27-2013 07:30 AM

Stan - not sure what TT you have - but most (if not all) require no set-up changes when drawing water supply from city water to fresh water. Automatic check valves keep water flow contained. The manual valves you are referring to could relate to by-passing your Hot Water Heater for winterizing....The water pump is switch controlled and should only be turned on when when relying on water supplied by the fresh water tank.

If you need help figuring out the triple valves that control flow through your hot water heater....just shout.

Hope that helps

Grumpy 09-27-2013 01:46 PM

You will probably need to change the valve settings to either fill the fresh water tank, pump water out of the tank, winterize or sanitize the water lines. Which coach do you have?


All times are GMT -6. The time now is 08:16 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.