Jayco RV Owners Forum

Jayco RV Owners Forum (https://www.jaycoowners.com/forums/)
-   Jayco Hybrids (https://www.jaycoowners.com/forums/f38/)
-   -   Stripped out latch on rear tip out platform. (https://www.jaycoowners.com/forums/f38/stripped-out-latch-on-rear-tip-out-platform-24071.html)

Husker Red 12-23-2014 03:28 PM

Stripped out latch on rear tip out platform.
 
Hey guys,
I have a 2007 Jayco 19H. The front and rear panels open using a T handle inserted into a square pin. The rear tip out latch is spinning freely when I put the T-handle in. I managed to get the door open and closed again by accessing it from the inside, but I'd like to fix that.
Has anyone else repaired or replaced that part?
Mike

Snake Plissken 12-23-2014 07:33 PM

I think they started using a different style latch now which may cause you to switch all of yours out.

Snake Plissken 12-23-2014 07:36 PM

Here's a mod showing somebody switching to a different style:
https://www.jaycoowners.com/forums/f30/replaced-door-latches-on-19h-fold-down-beds-8125.html

Or you could try contacting Jayco:

http://www.jayco.com/site/contact/

Husker Red 12-24-2014 06:34 AM

Thanks Snake. I might have to change mine out, but I'm hoping to just replace this one as that would be the easiest fix. I called the parts department and he wanted me to take a photo of the part I need and email it to him, so it will be a few days before I can get back to the camper in storage.
I'll try to completely remove the stripped one too so I can check it out. Maybe it's possible to tighten it up again with red lock tite or JB Weld?

Sw7000 12-24-2014 10:46 AM

I noticed mine wanting to spin when I turn it, so I push in on the bunk while turning the t-handle to relieve the pressure on the lock arm. Seems to help. If you get it fixed, maybe this will help it from happening again.

jerdog 12-24-2014 02:22 PM

When I bought my trailer it had been sitting for more than 5 years without any use. When the guy was showing it to me the handle was spinning on one of them so we had to use vice grips and lots of WD40 to get it to turn. It seems to be working OK now that it has gotten regular use but I can see now that I've got something else to upgrade now. Anyone know where those latch type handles are available?

Husker Red 01-13-2015 09:37 AM

latch
 
Well, I found the part number by calling jayco. The round latch with the square head bolt that goes through it and turns it is jayco part #0502230. I called my local campers world that sells Jaycos and they want a whopping $36.89 plus $15.33 shipping for a grand total of $52.22 for the part. :eek:

I'll call around and look for a better deal, but that seems really high for a $5 part. If that's my only option I'll have to do it. Hardly the worst expense I'll have with this camper, but sheesh.
Mike

Anybody have a good parts guy the recommend I try?

Snake Plissken 01-18-2015 09:19 PM

That's probably cheaper than the alternative which is replacing at least 2 of them with another version. I fear I may need to go this route in another couple years as mine are starting to get this way.

brianca2 01-18-2015 09:36 PM

$5 on Amazon Canada.
I dont know how much they are on amazon US site
http://www.amazon.ca/JR-Products-207...42070&sr=1-334

brianca2 01-18-2015 09:42 PM

$13 on Amazon US
http://www.amazon.com/s/ref=nb_sb_no...Out+Bunk+Clamp


All times are GMT -6. The time now is 09:56 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.