Jayco RV Owners Forum

Jayco RV Owners Forum (https://www.jaycoowners.com/forums/)
-   Jayco Travel Trailers (https://www.jaycoowners.com/forums/f7/)
-   -   Water Heater Tool (https://www.jaycoowners.com/forums/f7/water-heater-tool-25140.html)

ddrueckh 02-27-2015 10:31 AM

Water Heater Tool
 
Is there a tool with a T handle to remove the water heater plug or do you just use a socket? I thought it would be nice/convenient to have a tool with a T handle to quickly remove it without getting out a socket and such. If you know of one, please provide a link. Thanks!

Old Blue 02-27-2015 10:43 AM

I have never seen one and to be honest have never looked for one just used a socket but the next time I am at camping World I will look .

Camper_bob 02-27-2015 10:59 AM

I use a socket as well. My neighbor claimed that his lug wrench would work for that plug, but I tested mine (a 4-way, not the one that came with the TT) and none of them were the right size.

It would be nice to have a small tool to stick in the bucket with my hoses and fittings that I could use. It's kind of a hassle to break out the socket set every time I want to drain the tank.

SmokerBill 02-27-2015 11:06 AM

I just use pliers. It's a little tedious removing and tightening the plug, but it works for me.

TCNashville 02-27-2015 12:31 PM

Quote:

Originally Posted by SmokerBill (Post 273818)
I just use pliers. It's a little tedious removing and tightening the plug, but it works for me.

Same here, being careful not to booger up the plug.:)

ddrueckh 02-27-2015 01:32 PM

Thanks for the replies. Nothing so far...

Tunce the traveler 02-27-2015 01:39 PM

1 Attachment(s)
You looking for something like this? This was my Dads and I would say about 1950 is when he bought this. I have never looked for one but you try Snap on Tools for a start.

Tunce the traveler 02-27-2015 01:50 PM

Now that takes up even less space.

norty1 02-27-2015 02:00 PM

Water Heater Tool
 
I use a cheap ratchet w/ extension and a 1 1/16 socket. Keep it in my water box.

Camper_bob 02-27-2015 02:03 PM

How about something like this:

http://http://www.amazon.com/Neiko-8...-handle+socket

Then you just get the appropriate size socket and you're in business. I wasn't looking all that hard, but I bet you could find a shorter t-handle socket wrench that would work even better. I know I use a 3" (IIRC) extension to get around the burner tube on mine, so this one might be a bit long...


All times are GMT -6. The time now is 01:55 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.