mrmom

Sounds like you have a blown fuse in the converter. My guess would be a 30 amp fuse. The other cause may be a bad/blown converter. Need...

Sounds to me like a valve may be partially closed. Either that or a clog somewhere.

You may have something in the tank that is blocking the bottom drain hole. Had this once when I got an algae bloom in the tank. Had to...

It's worth a try if you have the means to bend the frame & weld in a new brace. You also have to think bout how you will reattach/seal...

For the pigtail, depends on whether you still have enough wire to add a plug and still reach your tow vehicle. Me, I would just buy a...

Not much will withstand the effects of sun and the elements. We welded a couple of tabs to the bottom of the battery tray and just use a...

Just a shot in the dark, but is there a heat register anywhere near the sensor? These can be set off by a rapid change in temp.

First question would be what WDH was sold with it & why would you want to replace it? Middleweight hitch is too light for your tongue...

Just a thought here about putting lithium batteries inside of the trailer: is anyone concerned about a short or other battery problem...

Glad to hear that you found the issue this time. What this would also tell me is that you probably need to check ALL the connections...

One thing that is super helpful for new owners is a couple of checklists for setting up your rig and for closing down your campsite...

Agree with others, coffee maker should not be tripping breaker. There must be something else on that line that is pulling power. Do not...

Agree with Grumpy, the only way to know for sure what parts you need is to check the tags on the axles and do a parts lookup. Just a...

That is why I made my own u-bolts. Used a 3' piece of 3/8 steel rod cut to the approximate length, cut threads on both ends and then...

Sorry for the slow reply, had to wait for the weather to cooperate! Here are a couple of pix of my setup. The 2" receiver plate is...