32RLTS - water / hose issue

[jolson0530]

Ok doing a water line fix as had water issues.

Behind or on other side of water panel where you add water to tanks
Had leak


Removed the crimp clamp and now trying to get white valve out of water line and doesn't seem to water to separate. Don't want to pull to hard either and cause other issues.

Have any of you had to replace or do any of this work and might you share how to get it off.

 

[Learjet]

are you sure that is not glued in that elbow?

 

[jolson0530]

No it spins within the hose -- just get it to separate the plastic elbow an hose

 

[Marcm157]

There should be nothing else holding it. Can you get a pick under the hose and see if you can help the separation a bit? If it turn inside the hose you just need to finesse it out.

 

[jolson0530]

There should be nothing else holding it. Can you get a pick under the hose and see if you can help the separation a bit? If it turn inside the hose you just need to finesse it out.

Thank you -- Good idea and will try -- it spins easily in hose but was holding what I could and was pulling pretty good and would budge.

 

[jolson0530]

Thank you for the responses

ok -- so as a follow-up to my question -- to get the elbow out of the hose - i needed to get a lighter and for just a brief moment to get the hose arm - and poof, if came right out.

again thanks for the responses