AC and nothing on control pa

[Jayfeatherwhite]

Hi Hoping somebody can help. 24RL Jayfeather 2022. Warranty ran out May 24. Everything was working ok after I just replaced my battery last Sunday morning. I have been plugged into shore power since Sunday. Today AC stops working and nothing on control panel works. Outlets, microwave and TV all work. Surge protector says power is good. No tripped breakers or blown fuses. Voltage was 13v on battery with shore power connected.

Any ideas would be appreciated. I am currently camping and leaving Monday for a 10hr trip home.

 

[markb5900]

I would start at the inline fuse near your battery. The on the frame where the battery cable goes from the battery, there is a little button there you can reset also.

 

[Jayfeatherwhite]

I would start at the inline fuse near your battery. The on the frame where the battery cable goes from the battery, there is a little button there you can reset also.

Hi Markb5900,
Thanks.
I checked all around the battery couldn't find in online fuse or button. There is a junction box but no fuses.

 

[markb5900]

Everything you describe is 12v related.
On your fuse panel, did you pull and check the black one at the end?
Is your battery disconnect in the correct position?

 

[Jayfeatherwhite]

Markb5900 thanks just checked the battery disconnect and it was in the off position. No one knows how it got that way. Tha AC not working I would never have thought to check the battery disconnect. Thanks again.

 

[markb5900]

Glad you got it.
Your furnace, ac, hot water heater and others all use a 12v control voltage for the boards t-stat etc…

Btw, I put a piece of tape over my battery disconnect so it can’t be bumped.

 

[Jayfeatherwhite]

Great Advice, I just did that to mine. Thanks Again