This is short and sweet, but thought i would share as I hadn't seen the install quite like mine, but might have missed it. Just as the title says, i got around to getting an EMS for the summer trips. I went with the HW version on my 50A 28BHE. I picked up 4ft of 6/3 and went to install. I didn't have much way of getting to the connect and the inlet underneath the rear bunk, so went to the power panel. Pulled it out to reveal the rats nest.
Anyway, i disconnected the wires coming into the converter and put them on the input side of the EMS, then put my 4ft cable on the output, then back to the converter. Seemed simple, but that cable was a bit to handle. I left the 4ft there as it made a nice radius in the area behind the power panel. Mounted the remote display just above the panel. Everything worked as it should in testing, so good to go! Added a picture of the display.