BMPro Level Status: Lost Connection

blair_evans

New Member
Joined
May 7, 2023
Messages
7
Location
Fort Saskatchewan
Hello. I just purchased a new Pinnacle 37MDQS and am not liking the new BMPro system so far.

I cannot operator my leveling jacks from the BMPro Controller or my phone. The status is saying: Lost Connection

I have tried repairing to the Node and disconnecting all power. Still does not work.

Anyone have this issue?

Thanks
 
does the leveling system work from the touch pad in the wet bay?

If so, I would look at the Jaycommand BmPro node behind the wall in the front storage for a RV-C plug and make sure it is plugged in all the way....that wire should go to this controller for the leveling system...also you should see a light on by the connections if the box below has power...you can see the red light glowing by the connector on the left side.


m3zZPvb.png
Click For Full-Size Image.
 
Last edited:
does the leveling system work from the touch pad in the wet bay?

If so, I would look at the Jaycommand BmPro node behind the wall in the front storage for a RV-C plug and make sure it is plugged in all the way....that wire should go to this controller for the leveling system...also you should see a light on by the connections if the box below has power...you can see the red light glowing by the connector on the left side.


m3zZPvb.png
Click For Full-Size Image.

Thanks a lot for the info. When I checked the connector was connected but I found a white wire that came out of a quick connector. This fixed the leveling system and the jayvoice that was not working as well. Saved me a trip to the dealer! Thanks again!
 

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top Bottom