2018 Jayco Redhawk 26XD
I'm 90% sure I am re-connecting my shore battery correctly but when I do there is no power.
Based on the schematic I have seen there is one ground wire and on the hot side: 1 connection that goes to the battery disconnect solenoid and starter control solenoid, 2nd that goes to the generator.
Does that sound right?
When I connect the wire that I think is the generator nothing works, not the master switch and not even the auto ignition! If I even touch it to the positive terminal with the power on it trips the master switch. When I put a meter on this wire it reads 8v when all power is off and 2v when the master switch is on. I just have it removed now and everything but the generator works fine. Im guessing I have a short of some sort in the generator starter?
I'm 90% sure I am re-connecting my shore battery correctly but when I do there is no power.
Based on the schematic I have seen there is one ground wire and on the hot side: 1 connection that goes to the battery disconnect solenoid and starter control solenoid, 2nd that goes to the generator.
Does that sound right?
When I connect the wire that I think is the generator nothing works, not the master switch and not even the auto ignition! If I even touch it to the positive terminal with the power on it trips the master switch. When I put a meter on this wire it reads 8v when all power is off and 2v when the master switch is on. I just have it removed now and everything but the generator works fine. Im guessing I have a short of some sort in the generator starter?