Draw

[WDW-FRF]

We did a country / santizing draw to disinfect our new MH water system. The siphoning seemed to take a long time. Is this how it works or am I experiencing a problem?

Also on our 31 FK the low point drain seems to be poorly planned with a short hose in front of the driver's rear dual wheel. It seems to me that road debris could break that line and you would loose all of your water - or some mchevious bum might open the valve and again you loose all of your fresh water.


Any thoughts?

 

[qwed94]

Dont know. Are you sure you had all the valves turned right? What were you sanitizing? The black tank or the fresh water tank? Did you have a place where air was getting in the water system? That will make water flow real slow.

The low point drain is not unusual (on the 31FK). I see drains located there everyday. inconvienent YES, unusual location NO.