electric steps

[ores311]

unable to get electric steps to retract....staying in extended position....2020 seneca 37ts....need advice

 

[Grumpy]

If that is happening with the ignition on it could be a bad controller, loose wire or blown fuse.

 

[Robbbyr]

unable to get electric steps to retract....staying in extended position....2020 seneca 37ts....need advice

Is the magnet still in place on your screen door? Do they come in if you turn on the rig's engine?

 

[JimD]

Check the following post.

https://www.jaycoowners.com/forums/f34/troubleshooting-electric-step-problems-98780.html

 

[RVermont]

JimD detailed breakdown is great. I would just add a quick check is to try your cord real and see if moves. If it moves continue with Jim’s document. If it doesn’t move check the reset on the chassis fuse. This unit can trip and since the stairs, cord reel and jacks are powered through this device if anyone of those doesn’t work check a different one.

 

[RESQRIQ]

Like RVermont said check the chassis fuse, I tripped mine while replacing my jack pump/ motor assembly. I grounded the hot wire and the steps stopped working along with the jacks. I followed the jacks hot wire to a chassis fuse up behind the batteries. I put the lever back in place and power was restored. Good luck.