Full Queen Replacement Mattress

[ArnoldJ]

Has anyone replaced a 74" RV queen mattress with a full size 80"? I have lots of room for it, I'm just wondering about how well sheets stay on & does it droop.

 

[damaltor]

First thing we do with the trailers we’ve had is replace the RV queen with a real queen mattress. Usually just add an extension on the base for the extra 6”, this is what we did with our present trailer.

 

[Oregontrx4]

I installed thicker plywood and supports at the feet. The factory plywood was incredibly thin.

 

[Poppyof5]

We did it hangs a little off the end but it’s been fine for 6 years

 

[CJAZ]

We did it hangs a little off the end .....

+1


Droops a little at the end, and does make it a bit harder for us to get by to the other side but all in all, not a big deal and sheets stay on fine.

 

[Scott_Trailer_Newbe]

We installed an All’s Well queen mattress. In our case the new Mattress was 60+ LBS which required more powerful struts. All was well, until the bed frame fell apart over time. Needless to say I built a new complete bed frame from the original design except using quality lumber and All’s Well again