Furrion rear backup camera?

[Hunter1970]

I have a 2018 Jayco Pinnacle 37WLSS with the backup camera installed. I am the third owner so the monitor was not passed on to the previous owners we purchased from. Does anyone know how I can figure out what monitor will work for my unit?

 

[OnTheGo]

Welcome to JOF!

Looking for a manufacturers label on the camera and calling their CS department should work. If the camera isn't labeled, you might be able to identify it from pictures on the internet.

Post a picture of it here and someone will likely have the answer.

 

[Hunter1970]

Thank you for the info. I have attached a picture.

 

[F350guy-JAY]

Obviously a Furrion which should work with their monitor but looking on Amazon I only saw one listing for the monitor alone and it was more that buying the whole system. I got a used like new Furrion camera with a 5 inch monitor on Amazon and it works great.

 

[Nevr2late]

We have the 4 camera system and unfortunately the Furrion cameras will only work with a Furrion monitor. They work OK but can’t record or display all 4 cameras for more than few seconds. We have the 7” monitor.

 

[Hunter1970]

Obviously a Furrion which should work with their monitor but looking on Amazon I only saw one listing for the monitor alone and it was more that buying the whole system. I got a used like new Furrion camera with a 5 inch monitor on Amazon and it works great.

Thank you.

 

[Anyroad]

I had the same problem. Never received the monitor. Seems the camera and monitor have to be from furion. The monitors are ridiculously expensive. I'm looking at replacing the whole system for about a 1/3 of the cost for the monitor alone

 

[Hunter1970]

I’m seeing the same. I will probably do the same unless I luck up on a good used one for a decent price. Thank you.

 

[SJ Communicator]

You can just buy another brand and get a complete set. I think I paid just a little over $100 (on sale) off Amazon. Not a bad unit for the price and does what it's supposed to do!