rgardjr
Advanced Member
I'm getting ready to start modding my Whitehawk 24MBH and this was a project that seemed like a good idea. My trailer is still sitting on the dealers lot so I haven't been able to start tearing into it. I've got a few questions that I'd like to confirm before I start ordering parts. The biggest assumption that I'm making is that the slide out operates off a 12V DC reversible motor. If this is the case then it looks like the Gama Electronics RF12V1PR-ASL would be an easy way to add a remote control. Most of my research on the trailer side is based on pictures that I took during the pre-purchase. My assumption that the motors are 12V DC reversible is based on the switch used. So here is a link to the the Gama piece I mentioned above:
RF12V1PR-ASL RF Remote Control Reverse Polarity 12VDC Motor Control with Auxiliary Switch Input
Pictures of the wiring diagram provided by Gama, current wiring based on my guess work and how I think the Gama piece would be wired into my trailer. Hopefully someone can let me know if I'm making incorrect assumptions on the trailer side of things.
RF12V1PR-ASL RF Remote Control Reverse Polarity 12VDC Motor Control with Auxiliary Switch Input
Pictures of the wiring diagram provided by Gama, current wiring based on my guess work and how I think the Gama piece would be wired into my trailer. Hopefully someone can let me know if I'm making incorrect assumptions on the trailer side of things.