Initial quality poll

[PetersPeppers]

Hi all, I found this place to type my question: I have a new 32BH Jayco White Hawk with twin recliners that don't hold the calves (drops to floor) and are impossible to return to upright position won't lock in the calf pads. 3 rd day owner and I've called dealership already about several other issues. 99 degrees in Delta Colorado air works good. Thank you

 

[KC8UBI]

Never Buy a Thor Product - Such Poor Quality

I am going to vent today. Again, Jayco quality at is best (sic). My 145RB SLX trailer is 3 years old now. Today, while I was setting up the table, evidently, I put it's weight on the front rounded corner as I flipped it in place. To my horror, the laminate was bent up and vinyl end cover was pulled out of its slot. This happened because Jayco slots the end the particle board so the vinyl end cover can slide in place. The result was the particle board failed and turned upward with the laminate on top. Fortunately, the laminate did not crease. I will figure out a fix. But, it seems like its one little thing after an another that fails due to poor workmanship or quality of the fittings they use.

 

[Flagger]

Hi all, I found this place to type my question: I have a new 32BH Jayco White Hawk with twin recliners that don't hold the calves (drops to floor) and are impossible to return to upright position won't lock in the calf pads. 3 rd day owner and I've called dealership already about several other issues. 99 degrees in Delta Colorado air works good. Thank you

Not the right thread

 

[Geoff2525]

2021 Bungalow Loft - floor concerns

I am seeking to learn if any other Bungalow Loft owners have had or are having issues with soft floors from date of purchase or the plywood subflooring separating under the linoleum causing it to crease. We have had a full floor re-support completed at the factory over the winter under warranty and it is happening again. We have been told by Jayco that this is the "design" of the floor of the Bungalow Loft. Anyone else having this concern at all out there? thanks for your help