Jayco Schematics and Drawings

dalenoel

Senior Member
Joined
Sep 10, 2007
Posts
3,522
Location
SE, MI
Don't know if everyone knows but Jayco will send you the drawings and schematics for your unit if you provide them the VIN and all of your contact information. These come as pdf files and have been free in all of my contacts.

You need to Fill out this Form at the Jayco site.

This will only work for a unit that is 'out of warranty'.

The VIN is very important since instructions that followed my 6 files were:

"Print 21.737 use page 19 of 39 Doorside Print 21.742 use page 8 of 21 Off-door side Print 22.012 page 4 of 9 rear wall Prints 22.335 use page 11 of 20 and print 22.025 use page 3 of 5"

You can see that out of 94 drawings I will use 5 of them for my unit. The sixth file included all of my 12V, 120V, Black, Grey, and FW systems.

I did not request the roof framing but may do that in the future. Be specific on what you want as they only give you what you ask for.

My request was filled in 18 hours so the service department was very responsive.

Great service from a customer focused company.
 
Be sure to be specific as to the type of drawings you want. My first go was to ask for the drawings. She wanted me to be more specific as there's 200-300 drawings per trailer.

This is for a 2012 bought this past December so they don't have to be out of warranty.
 
My Designer was still in warranty, and still is now, when I asked for the audio/visual wiring prints. They were emailed in a matter of minutes. I requested over the phone.
 
In 2008 they would not send mine until the warrenty ran out. Glad they are sending them earlier now.
 
I got the 120v and 12v drawings as for mine. Very nice to have!
 
Jayco has been great with me. Each time I have asked them for something, they quickly respond. Last time, I requested wiring diagrams and I had them back within 20 mins.
 
Hi, I just talked to Jayco about getting audio video schematics for my 2012 Pinnacle. They told me that until it was off warranty that they couldn't help.
 
Share drawings

Hey gang, I'm very new to this site and also to travel trailer camping. We've been tent camping for years and have finally made the leap. I have been voracious in reading everything I can about boondocking and extending the life of my batteries but want to put in solar charging and an inverter with an automatic transfer switch. I need a set of drawings for the 2011 Jayco 198RD, but fear it is still in warranty. We are the second owner. Does anyone have a set of drawings they would be willing to share with a newbie?

Regards,

John and Jodie
 
Hey gang, I'm very new to this site and also to travel trailer camping. We've been tent camping for years and have finally made the leap. I have been voracious in reading everything I can about boondocking and extending the life of my batteries but want to put in solar charging and an inverter with an automatic transfer switch. I need a set of drawings for the 2011 Jayco 198RD, but fear it is still in warranty. We are the second owner. Does anyone have a set of drawings they would be willing to share with a newbie?

Regards,

John and Jodie

Did you try the link in the OP?
 
I hope this is the right place. i need the wiring diagram for the "big foot" leveling system on my 2005 granite ridge/greyhawk. I need to see how the 120 amp breaker is wired into the system, and does it use a inverter.
thanks
journ 1.
p.s I tried the webb site at the top but it does not work any more.
 
Welcome to JOF :D

I would contact Jayco directly, they are usually pretty good about sending out the electrical schematics on their RV products. Just have your VIN number handy when you contact them.

Jayco 574-825-5861

Bob
 
schematics

Hi, I just talked to Jayco about getting audio video schematics for my 2012 Pinnacle. They told me that until it was off warranty that they couldn't help.

X2. Absolutely refused to give me any schematics/plans/etch as long as my unit is in warranty. Since it is a 2014, I have a long wait. I think it depends on whom you talk to or who gets your email!
 
I tryed to get the wiring schematic for mine 2014 White Hawk. I emailed Jayco and got a pone call. The person said that due to liability that Jayco will not provide the schematic.
 
Thanks for all the help and suggestions. "FYI" Jayco does not have elecltric diagrams on my " Care Free" awning.It seems that if the system was not installed at Jayco, then they did not receive any diagrams to those systems.
Thanks.
journ 1
 

New posts

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top Bottom