Leveling icon on inside control panel

OggieDoggie

Member
Joined
Mar 23, 2018
Posts
11
Location
Maumee
I lost the ability to use the inside control panel to fine tune my jacks. I only have the outside panel that just does front jacks and auto level. Everything works fine but I can't figure out how to get the inside panel to communicate with the leveling system control board. Any ideas?
 

Attachments

  • PXL_20250619_181612795.jpg
    PXL_20250619_181612795.jpg
    118.8 KB · Views: 24
  • PXL_20250619_181451675.MP.jpg
    PXL_20250619_181451675.MP.jpg
    135 KB · Views: 25
I have the same system as yours and I sometimes lose some of the icons on the screen. I end up missing the leveling icons also. What I have found is that the wiring from the screen to the control box under bedroom storage has a round gray wire that connects back to the screen. I can move this wire around at the control box and all of a sudden I have all my controls back. Seems to be a bad connection but I have not checked that far as of yet but maybe that will give you a good starting point.
 
I have the same system and the same problem from time to time. on my screenat the bottom there is a little button . I found that some times the button gets stuck pressed. if i can not wiggle it loose with a needle i remove the screen from the mount and disconect it put it back together and all seems to work fine again for a long while unless it is not used for a period when we do not camp.
 

New posts

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top Bottom