Lippert OneControl Touch Panel

[jtw-FRF]

I have the Lippert hydraulic auto level OneControl touch panel, it has no buttons on the controller to select manual. I can't figure out how to put it in manual mode, any help would be great.

 

[mavrick0]

You can do manual adjustments through the BMpro app. Do it all the time with our 22 32RLTS after it's done it's auto level.

 

[Learjet]

You can do manual adjustments through the BMpro app. Do it all the time with our 22 32RLTS after it's done it's auto level.

yep that is the easiest way....I also find I have to reset the zero (level) calibration a few times a year.

 

[mavrick0]

yep that is the easiest way....I also find I have to reset the zero (level) calibration a few times a year.

I really don't bother anymore. I have a levelmatepro installed in the trailer and once the auto level is done find my true level with that. It's not usually much, maybe 3/4" of an inch but that's still enough to have doors swing open or closed.

 

[Learjet]

I have the Lippert hydraulic auto level OneControl touch panel, it has no buttons on the controller to select manual. I can't figure out how to put it in manual mode, any help would be great.

Use the BmPro phone or tablet app to adjust in manual...its in the Motors tab