Kevprelude
New Member
Hi everyone. I just bought my very first camper: a 2007 Jayco 12 HWS. I wanted to test out the hot water in my backyard so I filled the fresh water tank, ran the pump, cleared the lines of both hot and cold. I then lit the pilot, turned it to the hottest setting and waited 15-20 min. Unfortunately when I turn the hot water on, I am only getting luke warm water. Oddly when i switch from hot to cold, the water will get warm for a split second and go back to luke warm. Now I pulled the plastic plug on the hot water tank 20 minutes after shutting the pilot, and the water in the tank was pretty warm. I searched everywhere for a bypass valve, but no success
Anyone have any ideas? Im leaving friday on my birthday to go on our first outing with the pop-up
Thanks in advance!

