No water after house filter

[Fr8Train-JAY]

I was using the unit this past winter. I was away for the weekend, ran out of propane and my hose and hose filter froze. Bottom of filter housing broke.

Yesterday I replaced the entire house filter unit, hooked up the hose and no water.

I have confirmed water to the filter and after. Water line goes from filter to the valve manifold. I think the freeze might have damaged the valve.

Any other ideas? Any source to get a new manifold or what valves to use to replace them?
Thanks

 

[parrott]

Would be good to post what camper/ motorhome you have.
Here is a pic of mine.

 

[Fr8Train-JAY]

2014 Jayco Eagle Premier

 

[DavidandLennie]

Any source to get a new manifold or what valves to use to replace them?

Has anyone rebuilt these valves or know of a source? My local dealership wanted $275 for a new manifold. No thanks!!

David

 

[Edutron]

Some filters only install one way. I installed one (water inlet) filter into ints housing not knowing it was upside down and NO water. Drove me nuts and at that could relieve the water pressure to unscrew the plastic housing. Long story short, flipped filter around because one end was sealed and fixed. Camco filters are open on both sides, others are not.

 

[Edutron]

In the beginning when you don't know about the fine details! Some filters only install one way. I installed one (water inlet) filter into its housing not knowing it was upside down and NO water. Drove me nuts and at that couldn't relieve the water pressure in the water filter housing to unscrew the plastic housing. Long story short, flipped filter around because one end was sealed and fixed. Camco filters are open on both sides, others are not.
Jayco Pinnacle.