Outer Slideout Replacement Gasket

[ahill261]

Hello Fellow RVs,
I know this is a REAL long shot but I need the "V0..." code number on my kitchen slide out. It is a Schwintek slide mechanism on a 2015 Jayco Pinnacle 36RSQS with four slide outs. In contacting Lippert, they responded that they need the code starting with "V" and RPO number on the inside label of Schwintek frame. Unfortunately, my label is covered with a metal support plate from the factory that hides both the "V" number and the RPO number.
I've measured the outside fixed gasket for that slide and it seems to not be in any inventory (even Steel Rubber Products). It is a peel and stick, total of 2" long of which the wiper blade is 1 1/4" by 1/8" thick. No snap-ins; it just peel-N- sticks in a groove on the outside metal trim.
Thank you!

 

[klassic]

Someone here, or on another group found the seal and it was pretty cheap. Sorry I’m no help of where to find the tread.
But to read your label just unscrew the bracket. It should be made of aluminum and you can bend it out of the way then push it back into place and put the screws back in.

 

[stu stoner]

A wide variety of slide out seals are available thru Etrailer....you may want to go to their website and see if any match yours.

 

[ahill261]

I've tried etrailer...no luck. Even by taking out the 2 screws on the metal plate, the plate bends the wrong way- even closer to the label There is about 1/8" between the plate that label frame. The metal plate would have to come out completely. Thanks for suggestions.

 

[ahill261]

I f I und a wider gasket from Steele Rubber Products but don't want to cut it for the entire length.

 

[stu stoner]

This wiper from Lippert is similar to the one you described. I am trying to get a better end profile picture for you. Lippert seal #240410

 

[ahill261]

Yes, it appears to be the correct shape. Do you remember the product code number? Is the entire width 2" with a 1.25" wiper blade?

 

[stu stoner]

I replaced the outer wiper on our 2017 Alante with this Lippert #240410. Our Slide PN is #V000538466. The measurements as stated by Lippert is 1.25" x 2.03"....google the seal part number for more information. Easy to replace, just have to insure the surface is really clean for good adhesion.