Pictures of landing gear wiring

[trockyh]

I just replaced my motorized landing leg, forgot to take pictures of the wiring and not sure how to proceed. Anyone with pictures of Jayco 5th wheel 24.5 ?

 

[Kevin Cooper]

Too late for this one, but next time you do something like this, do not undo the connections. Cut the wires past the splices and that will leave enough colors that you will know where each connects to.

 

[norty1]

When I replaced my landing gear recently, there were only 2 wires from the switch to the motor?

I could post a picture tomorrow if that would help.

 

[norty1]

OK here is the picture. My motor only has 2 wires going to it. from the motor there are 2 wires: Red and Yellow

Red is tied to another Red wire that goes to the up/down switch.

Yellow is wired to a 30a inline fuse holder then tied to a Black wire to the up/down switch.

 

[trockyh]

OK here is the picture. My motor only has 2 wires going to it. from the motor there are 2 wires: Red and Yellow

Red is tied to another Red wire that goes to the up/down switch.

Yellow is wired to a 30a inline fuse holder then tied to a Black wire to the up/down switch.

Thanks for your reply. Got it back together today and all works great.