Repair(s) advice or ideas

[06camobaja]

Not sure where to start here. So I’ll give you what concerns and repairs I think I’ll be doing. It’s an 06’ Baja 10c for reference. The PO cut the plug for lights and brakes can I upgrade to 7pin? The interior is in rough shape was going to gut and renovate. Ideas for that? The roof is shot as well as front and rear cab or at least the exterior siding is. What to do where to begin

 

[mrmom]

For the pigtail, depends on whether you still have enough wire to add a plug and still reach your tow vehicle. Me, I would just buy a premade pigtail with the 7 pin plug molded on and splice it in at the junction box on the a-frame.

Before doing anything to the interior, I would deal with the roof/siding. No point in doing interior repairs if you have roof leaks! The bigger question is whether it is worth the money to do all this work on an 18 year old trailer vs just buying a newer one. The latter option is probably going to be way cheaper in the long run.

 

[06camobaja]

For the pigtail, depends on whether you still have enough wire to add a plug and still reach your tow vehicle. Me, I would just buy a premade pigtail with the 7 pin plug molded on and splice it in at the junction box on the a-frame.

Before doing anything to the interior, I would deal with the roof/siding. No point in doing interior repairs if you have roof leaks! The bigger question is whether it is worth the money to do all this work on an 18 year old trailer vs just buying a newer one. The latter option is probably going to be way cheaper in the long run.

I was able to get the trailer for an extremely good deal. The trailer seem fairly solid minus these details I’ve had a class A a many moons ago and this is 10x more simplistic. I do plan to do some work to this trailer as even with a new canvas and remodeling I’m still beating the KGB/ADA value. Use it as a stepping stone into a nicer bigger model eventually. I think the biggest problem with this trailer is it sat unused for what seems to be years