Tire pressure sync problems

[heyDC]

We own a ‘22 321RSTS that recently spent 2 months in the shop. When I picked it up the batteries were dead including the one in the BMPRO controller. That’s a story of it’s own. All sensors had to be resynced including the light switches.
The problem I’m having now is getting the tire pressure sensors to pair correctly. The phone app to shows close to the pressure I get with a gauge but the controller numbers are really wonky. For example LF on app = 57F/72psi. The controller shows -65F/111psi. Yes that’s a minus sign.
How do I get the controller to read correctly?
Long time lurker, 1st time poster. I’ll set back and listen to your sage advice.

 

[billcf7]

We own a ‘22 321RSTS that recently spent 2 months in the shop. When I picked it up the batteries were dead including the one in the BMPRO controller. That’s a story of it’s own. All sensors had to be resynced including the light switches.
The problem I’m having now is getting the tire pressure sensors to pair correctly. The phone app to shows close to the pressure I get with a gauge but the controller numbers are really wonky. For example LF on app = 57F/72psi. The controller shows -65F/111psi. Yes that’s a minus sign.
How do I get the controller to read correctly?
Long time lurker, 1st time poster. I’ll set back and listen to your sage advice.

Try using the BMPRO tech support. I had good luck with it
https://teambmpro.com/technical-support/

 

[heyDC]

Thanks for the advice. I have submitted a request and will wait for a reply. We’ll see how long that takes.
I unpaired and repaired (repaired? paired again?) both the controller with the node and the controller with the sensors today and the numbers are still wrong on the controller i.e. 57F@75psi on the app vs. -63F @ 3psi on the controller. The app pressure was verified with a gauge.
Makes my head hurt