Trailair Pinbox Replacement

[htglaser]

2021 Jayco Eagle HT 30.5 CKTS with Trailair Turning Point Pinbox, uses a wedge to connect to Pullrite OE 25K Hitch. Tow vehicle is 2021 GMC Sierra HD 2500 with 6-3/4 box. Would like to replace the Turning Point pinbox but keep the Pullrite OE Hitch. I sheared off one of the bolts holding the wedge in place. Has anyone replaced this pinbox with another rotating pinbox?

 

[Stan&Sharon]

I have a standard pinbox. I purchased a PULLRITE 331757 capture plate so I could also use a Pullrite SuperGlide Hitch.

 

[markb5900]

2021 Jayco Eagle HT 30.5 CKTS with Trailair Turning Point Pinbox, uses a wedge to connect to Pullrite OE 25K Hitch. Tow vehicle is 2021 GMC Sierra HD 2500 with 6-3/4 box. Would like to replace the Turning Point pinbox but keep the Pullrite OE Hitch. I sheared off one of the bolts holding the wedge in place. Has anyone replaced this pinbox with another rotating pinbox?

You probably want to look at a Reese.

https://www.reeseprod.com/product/69220_fifth-wheel-coupler

 

[Jagiven]

I have read where people who have sheared off that bolt because it was loose. Might want to just replace the bolt and apply some Loctite or use a Nyloc nut. What I have read, everyone who has used this solution has not had another issue.

 

[poohbear]

I have read also that at least one brand of rotating pin box cannot be changed out to a standard style pinbox .