X23B bearings and seals

[Derrick2018]

Hey, does anyone know what size bearings and grease seals I need for a 2018 Jayco Jay Feather x23B? I bought it last summer, and the dealer we bought it from packed the bearings, which was fine for that first year, but it should probably be done again soon. It's kinda spendy for local tire shops to do it, so I thought I'd do it myself. I know you can figure this out after you pull off a tire and the hub, but I just thought I'd save myself a little time and have all the parts I need before I do that.

 

[GarlicDude]

Here is the Dexter manual for their axles

 

[Tadsher]

Hey, does anyone know what size bearings and grease seals I need for a 2018 Jayco Jay Feather x23B? I bought it last summer, and the dealer we bought it from packed the bearings, which was fine for that first year, but it should probably be done again soon. It's kinda spendy for local tire shops to do it, so I thought I'd do it myself. I know you can figure this out after you pull off a tire and the hub, but I just thought I'd save myself a little time and have all the parts I need before I do that.

Here is another thread with more info about the bearings and seals

X23B Wheel Bearings/ Seals

I am looking to inspect and service my wheel bearings this spring. Can anyone tell me if they are traditional style bearings, or sealed? Also, where can I find them for 2016 X23B online? Thanks in advance,

www.jaycoowners.com

 

[Jagiven]

I doubt mine are the same as yours, as I have torsion suspension. When I did mine the first time, I pulled one wheel, the bearings and seal. Then went to my local auto parts store with the seal, and pickup 4.

It's an easy job. I cleaned the bearings in an oil pan.

 

[netlos]

I doubt mine are the same as yours, as I have torsion suspension. When I did mine the first time, I pulled one wheel, the bearings and seal. Then went to my local auto parts store with the seal, and pickup 4.

It's an easy job. I cleaned the bearings in an oil pan.

I have the X17Z, and did the same thing, pulled one out and went to the local parts shop, got a few spares at the same time.