Jayco RV Owners Forum - Big Sky's Album: A/C Hard Start Kit install-Coleman model 8333D8564

		Jayco RV Owners Forum > Big Sky's Profile > Albums
A/C Hard Start Kit install-Coleman model 8333D8564

A/C Hard Start Kit install-Coleman model 8333D8564

I first contacted Coleman (Airxcel RV Products) with my model and requested the part #. I'd seen on the JOF many who have used the Supco Hard Start Kit, which cost less and is on Amazon as well as eBay. I asked Coleman about using the Supco. This was the email response:

The 8333 series had a start kit that was available on most models. Yours however did not come with it preinstalled. The part number you are looking for is 8333A9021 and it would be available from Camping World. I do not recommend the Supco caps, as they send a huge burst of voltage to the compressor at start up, which will over time damage the compressor.

Thanks,
Mike Dickey
Airxcel, RVProducts Division
Technical Support Coordinator

I have a 2007 Jayco 26 BHS with 13,500 A/C Coleman Mach. Model 8333D8564. When I contacted the manufacturer they informed me I would need to...

Everything included (instructions, Hard Start Capacitor strap to secure capacitor in place. (I used existing strap already in place.) $18.99 + $6.00...

Step by Step, and extremely easy to follow instructions that were included in the $19.00 kit + $6 shipping.

Figure 1, showing access panel placement.

Remove the A/C plastic cover and on the left side there is a access panel that removes with two screws.

The opened access area will show ample space for the new hard start unit. I first removed the screw from the strap that secures the existing fan...

Super simple DIY upgrade. Yellow wire from the hard start capacitor connects to the run capacitor lead that has a yellow wire already attached to...

Disclaimer:

This website is not affiliated with or endorsed by Jayco, Inc. or any of its affiliates. This is an independent, unofficial site.

All times are GMT -6. The time now is 06:02 PM.