JayCo Octane SL 272 Mods
Main mod so far...
Kitchen shelf unit and accessories.
We needed to have additional shelving near the kitchen to semi-permanently mount the Keurig and Toaster and also provide a trashcan. Coffee and toast are a must in the mornings for our family. And since the 272 can sleep 10...
2 Harriscos 5' Black Vertical E-Tracks - amazon
2 Aluminum shelves from PitPosse - amazon
4 fixed shelf brackets for e-track from Northerntool
1 e-track Wastebasket from Northerntool
1 e-track Wire basket from Northerntool
Custom cut San Jamar C4400PF stainless steel cup dispenser for the big red cups - amazon
Stainless steel Paper towel holder above sink - amazon
Notes: Get a really good stud/electrical-wire finder and trace these on the wall. I used rubber washer'd roofing screws for the etracks (from Home Depot or Lowes) and also used a fiber-optic camera to check the studs/wires behind the walls (I think I bought that years ago for my boat work). Ensure power is off when doing the pilot holes for safety.
The vertical e track are specifically positioned to be off the floor and not all the way to the ceiling. To low and some etrack holes are useless and too high and its not usable either. They are also spaced just wide enough for the fixed etrack brackets on the waste can.
And FYI...with wall mounting and not hitting all screws on studs, I definitely are not going to use these for securing cargo more than you see here. No ATV/Motorcycles will be secured to these. These are just for Keurig and Toaster...