Loose holding tank straps

[Irie]

There are 2 metal straps, (apparently "safety"?) that look like they would support the grey water tank if it for some reason fell out of position. There is probably 1" of slack in it.
Does anyone know if these should be tight around the tank?

Thanks, Ben
2017 Redhawk 26

[Jagiven]

They are all like that. I have never been convinced they are safety straps. I think they might be used during the assembly process.

[Subaru297]

+1

I think they are only to assist in assembly. They hold the tanks in place while they are bolted around the edge I think.

Cheers

[Hivoltage98]

If you fill the tank completely the tank will expand and those straps should be tight. They're there to support the tank when it's full.


Sent from my iPhone using Tapatalk

[Irie]

Thanks everyone for the replies

[M&A]

Originally Posted by Hivoltage98

If you fill the tank completely the tank will expand and those straps should be tight. They're there to support the tank when it's full.


Sent from my iPhone using Tapatalk

Was just wondering the same thing. Thanks for that and the OP's post as well.