Jayco RV Owners Forum
 


Reply
 
Thread Tools Display Modes
 
Old 07-30-2012, 02:03 PM   #1
Kave&Lucky
Senior Member
 
Kave&Lucky's Avatar
 
Join Date: Nov 2011
Location: Clinton, NC
Posts: 260
Magnadyne M4-LCD

We just recently had the Magnadyne M4-LCD combo unit installed. While traveling on a trip,(our first trip after having the unit installed) we experienced an issue where anytime the brake pedal was depressed the m4-lcd unit would cycle away from whatever screen you had the unit displaying to the backup camera view then after a few seconds the unit would return from the backup camera view. If lucky it would go back to the function you were previously viewing. At times, if we had the unit set to the navigation function it would go to the radio. Anyone had this problem or can direct me to a solution.

Thanks!
__________________

__________________
Kettrell & Sharon
Greyhawk 31DS
Kave&Lucky is offline   Reply With Quote
Old 07-30-2012, 04:15 PM   #2
Mike WA
Junior Member
 
Join Date: May 2012
Posts: 27
It sounds to me like the installer did'nt wire it up correctly I would take it back to the shop that installed it..
__________________

__________________
2012 Pinnacle 36 REQS Full Body Paint.

2000 Dodge Ram 3500 Cummins
Mike WA is offline   Reply With Quote
Old 04-07-2013, 12:19 PM   #3
RESchreibJr
Junior Member
 
Join Date: Apr 2013
Location: Delaware
Posts: 4
Same Problem

Kave & Lucky,

We have experienced the same problem with our Magnadyne M4 unit. Actually, we just had the M4 replaced at the dealership and are experiencing the same problem with the new unit. Has your problem been fixed? If so, please advise how it was fixed; the service department at our dealer is not familiar with this problem.
RESchreibJr is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 09:10 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2014, vBulletin Solutions, Inc.