Well I bought 2 rolls of ultra bright led's 600 led's per roll at 16 feet each roll @ 20 bux each and the 2 bags of led connectors ( 10 in each bag ) 5 bux each.
Clean the surface with rubbing alcohol. Did this to every single lite in my 08 Jayco 351 RLQS 5er
Note: Can only put 4 pics up in these forums so I put a link to show you the rest of the pics...............
This is what you will need:
Roll of elec. tape
12 volt power supply ( optional )
12 volt circuit tester with lite
Roll of #12 or #14 Black and Red Wire
Here are my pics:
This is what type of lite most of us have in our RV's
These are the connector you cut in half to have double the connectors!
Tear off the lite socket
Roll of 600 led's with sticky backing
Part 2 next post!