Originally Posted by arkhillbilly
Perhaps my bumper is larger than 4x4 inches, for my rhino fittings fit into it. All I do is align the four knobs on the fitting to match into the four corners of bumper. It seems to be just wide enough at the corners!
fit in the bumper without
the 45* clear elbow on one end and a 90* on the outlet end. I leave those attached because I like to minimize handling the sewer stuff before and after dumping.
Originally Posted by NC Roamer
I use a plastic storage container
for my hose and fittings. Easy to get to the hose, easy to put it back, and the bin is simple to rinse out.
Someday I hope to do the same... when
I find a container that fits the storage area just above the sewer outlet of my trailer ('15 27RLS). Until then, I can (carefully!
) stuff the bag with the sewer stuff into the space available.
Sherm & Terry w/rescues Steve (std Poodle) & Eydie (min Schnauzer)
2015 Jay Flight 27RLS (Camped: 102 nights 2015, 90 nights 2016)
2006 Ford F350 6.0 PSD, Lariat, 4WD, CC, LB, SRW, auto., Camper pkg.