|
01-15-2015, 07:48 PM
|
#1
|
Member
Join Date: Sep 2014
Location: Cedar Park
Posts: 88
|
Newly designed Furnace intake/exhaust port
Howdy -
We have a new 2015 Flight 32BHDS and I am having a very difficult time locating an insect screen to fit over our Atwood furnace intake/exhaust port. It measures 4.75" x 6.25" and none of the Camco screens I've found are configured to fit this part.
Does anyone else have this same furnace intake/exhaust port?
Anyone know where to get a screen (besides fabricating one)?
Many thanks,
Dave
__________________
2015 Jay Flight 32 BHDS (Elite, Technology, Thermal pkgs, 50-amp)
1999 Ford F-250 7.3L Powerstroke 4x4 Lariat Crew Cab SRW 3.73
6.0L Upgraded Transmission Cooler
Autometer Gauges (EGT, Trans & Water temp, Boost)
K&N Cold Air Intake; MBRP 4" Turbo Back Exhaust
Curt Class IV Receiver Hitch
Prodigy P3 Brake Controller; ProPride 3P Hitch 1400#
|
|
|
01-15-2015, 08:29 PM
|
#2
|
Senior Member
Join Date: Nov 2014
Location: Florien, LA
Posts: 1,872
|
I'm in the same boat. Coudln't find any of them online that was for that newer design. Thinking about taking one of the older ones I have for a suburban or something that will fit over the whole thing. Just about the only option until Camco, which usually makes all of them, comes out with something. If you come across something please post.
__________________
John and Rebecca Dickson
Emma-13 / Little John-10 / Iva-7
2013 Ford F-350 Lariat FX4, CC LB PSD, DRW
2015 Jayco Jay Flight 28BHBE (#8)
|
|
|
01-15-2015, 08:39 PM
|
#3
|
Junior Member
Join Date: Jan 2015
Location: Westland
Posts: 21
|
I have a 2015 StarCraft 24rls and I just used one of the other screens they make that fits over the entire outlet worked fine for me!
|
|
|
01-15-2015, 08:41 PM
|
#4
|
Senior Member
Join Date: Nov 2014
Location: Florien, LA
Posts: 1,872
|
Kind of what I was thinking of doing.
__________________
John and Rebecca Dickson
Emma-13 / Little John-10 / Iva-7
2013 Ford F-350 Lariat FX4, CC LB PSD, DRW
2015 Jayco Jay Flight 28BHBE (#8)
|
|
|
01-15-2015, 08:55 PM
|
#5
|
Member
Join Date: Sep 2014
Location: Cedar Park
Posts: 88
|
Quote:
Originally Posted by rbrent
I have a 2015 StarCraft 24rls and I just used one of the other screens they make that fits over the entire outlet worked fine for me!
|
rbrent -
Do you have the same furnace port that I show in my photos? What part number screen did you purchase? I also considered using an existing larger screen but the corrugated aluminum siding of my trailer will not allow a flush mount (as it would for smooth/flat fiberglass siding).
All -
I sent Camco an email asking if they will be creating a new insect screen design for this new furnace port setup or what existing product will be compatible. I will let you know what I hear from them.
Thanks,
Dave
__________________
2015 Jay Flight 32 BHDS (Elite, Technology, Thermal pkgs, 50-amp)
1999 Ford F-250 7.3L Powerstroke 4x4 Lariat Crew Cab SRW 3.73
6.0L Upgraded Transmission Cooler
Autometer Gauges (EGT, Trans & Water temp, Boost)
K&N Cold Air Intake; MBRP 4" Turbo Back Exhaust
Curt Class IV Receiver Hitch
Prodigy P3 Brake Controller; ProPride 3P Hitch 1400#
|
|
|
01-16-2015, 04:13 AM
|
#6
|
Junior Member
Join Date: Jan 2015
Location: Westland
Posts: 21
|
Didn't think of that. I have a fiberglass side so it fits flat against the side, It might not work too good on yours. But have the same furnace port.
|
|
|
01-16-2015, 07:22 AM
|
#7
|
Member
Join Date: Sep 2014
Location: Cedar Park
Posts: 88
|
Quote:
Originally Posted by rbrent
Didn't think of that. I have a fiberglass side so it fits flat against the side, It might not work too good on yours. But have the same furnace port.
|
Which model screen did you go with? Can you paste the URL to the website in your reply?
Thanks,
Dave
__________________
2015 Jay Flight 32 BHDS (Elite, Technology, Thermal pkgs, 50-amp)
1999 Ford F-250 7.3L Powerstroke 4x4 Lariat Crew Cab SRW 3.73
6.0L Upgraded Transmission Cooler
Autometer Gauges (EGT, Trans & Water temp, Boost)
K&N Cold Air Intake; MBRP 4" Turbo Back Exhaust
Curt Class IV Receiver Hitch
Prodigy P3 Brake Controller; ProPride 3P Hitch 1400#
|
|
|
01-16-2015, 08:24 AM
|
#8
|
Member
Join Date: Sep 2014
Location: Cedar Park
Posts: 88
|
Camco Response
Good morning -
I heard back from Camco this morning.
They are working on developing a new product to fit the new furnace configuration but do not yet have an estimate on when it will be available. The man did say they hope to have it by summer, but again no ETA as of today.
NOTE: If you have additional product questions you may email Camco at:
Info@Camco.net or call Customer Service at 1-800-334-2004
Many thanks,
Dave
__________________
2015 Jay Flight 32 BHDS (Elite, Technology, Thermal pkgs, 50-amp)
1999 Ford F-250 7.3L Powerstroke 4x4 Lariat Crew Cab SRW 3.73
6.0L Upgraded Transmission Cooler
Autometer Gauges (EGT, Trans & Water temp, Boost)
K&N Cold Air Intake; MBRP 4" Turbo Back Exhaust
Curt Class IV Receiver Hitch
Prodigy P3 Brake Controller; ProPride 3P Hitch 1400#
|
|
|
01-18-2015, 06:56 AM
|
#10
|
Senior Member
Join Date: Jul 2013
Location: Cypress, TX
Posts: 350
|
Quote:
Originally Posted by rbrent
|
I got the same one - seems to work great
__________________
2014 GMC Sierra 4x4 crew cab with 6.2L and max tow package
2015 Starcraft Autumn Ridge 329BHU
2020 Starcraft Autumn Ridge Outfitter 182RB
Cypress, TX
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|